Download Operation Manual / Mode d`emploi

Mounting frame to wall
B
A
AA
NOTE: it is recommended that the frame
be fastened to at least one wall stud when
mounting to drywall.
NOTE: the frame can be mounted to a
solid surface like wood without the use of
wall plugs.
A
Center Holes /
trous du centres
B
Step 1: First choose an ideal position to
mount the frame.
Step 2: Locate one wall stud behind drywall.
Step 3: hold the frame against wall and
center middle holes with wall stud.
Step 4: Mark each of the holes with a pencil.
Step 5: use 4 wall plugs (not included) on
outside mounting holes.
NOTE: refer to the instructions provided
with the purchased wall plugs on how to
install properly.
Step 6: hold the frame in place and screw
each of the included screws into the wall
stud (center) and wall plugs (outside).
1
PULL THE LOCKING PIN ( A )
REMOVE DISPENSING ASSEMBLY ( B )
(REMOVE ALL DESPENSING ASSEMBLYS)
tirez la goupille de verrouillage ( a )
Enlevez l’assemblée de distributrion ( b )
(Enlevez tous les assemblées de distribution)
B
B
A
B
A
B
B
B
B
A
Drywall /
Cloison sèche
A
Wall Stud /
Poteau de cloison
2
DISPENSING ASSEMBLY ( A )
SLIDE IN BOTTLE ( B )
L’assemblée de distribution (a)
Glisse la bouteille dedans (b)
A
B
A
A
A
B