Download FR - NL - ES

HAM200
07
USER MAN
NUAL
1.
Introduction
To all residents of the Eurropean Union
Importan
nt environmentall information abo
out this product
This symbol on the
t
device or the package
p
indicates that disposal of th
he
device after its lifecycle could harm
m the environmen
nt. Do not dispose of
d municipal waste; it should be taken
the unit (or battteries) as unsorted
to a specialized company for recyc
cling. This device should
s
be returned
d
to your distributtor or to a local rec
cycling service. Re
espect the local
environmental rules.
If in doub
bt, contact your local waste dispo
osal authorities..
Thank you for choosing the Velleman!
V
Please re
ead the manual tho
oroughly before
bringing th
his device into service. If the device was
w damaged in tra
ansit, don't install or
o
use it and contact your dealer. Damage caused
d by disregard of certain guidelines in
this manua
al is not covered by
b the warranty an
nd the dealer will not
n accept
®
responsibility for any ensuing defects or problems. Refer to the Velleman
V
Service and Quality Warra
anty on the last pages
p
of this manu
ual.
2.
Batttery Installa
ation
Remove th
he screw and lift th
he cover of the batttery compartmen
nt. Insert 3 AAAbatteries (not included). You
u will now hear two
o beeps. Press a random key to liste
en
b
or if the beep
p
to the sound this produces. Replace the batterries if there is no beep
sounds dull and sluggish. Re
eplace the battery cover and screw it down. The best
results are
e achieved with alk
kaline batteries.
3.
Settting your Personal Code
Insert the batteries. Press th
he orange function
n key “F”. Enter 33
33 (default code)
and the red LED will light. En
nter your personal 3-digit code. The
e red LED goes outt
and one lo
ong beep confirms your new code. Fo
ollow the same pro
ocedure to change
e
your perso
onal code.
4.
Adjjusting the Exit and En
ntry Delays
s
a)
b)
Press F and then the
key. Select an entry delay of 3 (default
(
value), 15
5
or 30
0 seconds by pressing 1, 2 or 3 respectively. A single
e beep confirms the
setting.
To change the 10-seco
ond (default value) exit delay: press
s F and then the
c)
key. Select an exitt delay of 10, 20 or
o 30 seconds by pressing
p
4, 5 or 6
respectively. A single beep
b
confirms the setting.
To change the alarm duration
d
(default value
v
30 sec.): pre
ess F and then the
key. Select an alarm duration of 30 or 60 seconds by pressing 7 or 8
respectively. A single beep
b
confirms the setting.
08.12.2009
2
©Velleman nv