Download Modulare System Management Konsole Modular System

Device description
Pilot/Center with extension units
The Pilot/Center is the core of the system management console, which is expanded
by the Pilot/Jog and Pilot/Joy expansion units.
‰ The expansion units can be connected to the left or right side of the base module in any order and combination. The connection is made either via USB cable
or – for direct connection – via the included S-connector.
‰ In addition to the system connectors Pilot/Jog and Pilot/Joy expansion modules have a standard USB type B port on the back, which can be connected to a
PC and over which autonomous operation of the device is possible.
‰ The USB connection can also be used to power the expansion modules. This
means that the power is supplied optionally
Note
x
Centrally via the connection of the power connector and the supply of the
expansion units via USB or
x
Via the power plug from Pilot/Center and expansion units. In this case, two
or more power plugs ensure increased reliability due to the redundant power supply of the entire system. If a circuit or a power supply fails, one of the
intact power supply units takes over supply of the system without interruption.
This type of power supply is recommended.
Pilot Joystick
The Pilot/Joy expansion unit is connected via USB or with a system connector to
the Pilot/Center.
The joystick is used for simple control of PTZ cameras and domes. Using the function keys, zoom and focus of the active camera can be operated. Four other function
keys F1 to F4 are user assignable.
The function keys of the Pilot/Joy are four separate keys assigned to the Joy, which
can trigger GeViSoft actions.
Pilot Jog/Shuttle
The Pilot/Jog expansion unit is also connected via USB or via a system connector
to the Pilot/Center.
The jog shuttle allows for easy operation of the digital video recorder. Using the
function keys, the markings for the export of a video sequence are set and the export started. Other function keys are freely programmable.
The function keys of the Pilot/Jog are four separate keys assigned to the Jog, which
can trigger GeViSoft actions.
V 1.3
11