Download ThinApp-Benutzerhandbuch
Transcript
ThinApp-Benutzerhandbuch . ... 438 total calls 7847975891 total cycles (2809,64 ms): |sprof| ts_load_internal_module 764794646 cycles (273.80 ms) on log entry 21753 426837866 cycles (152.81 ms) on log entry 191955 408570540 cycles (146.27 ms) on log entry 193969 . . ... 94 total calls 4451728477 total cycles (1593,76 ms): |sprof| ts_lookup_imports 544327945 cycles (194.87 ms) on log entry 21758 385149968 cycles (137.89 ms) on log entry 193970 187246661 cycles (67.04 ms) on log entry 190210 . . ... 34 total calls 1099873523 total cycles (393,76 ms): |sprof| new_thread_start 561664565 cycles (201.08 ms) on log entry 151922 531551734 cycles (190.30 ms) on log entry 152733 1619002 cycles (0.58 ms) on log entry 72875 Potenzielle Fehler Der Abschnitt Erkannte potenzielle Fehler (Potential Errors Detected) zeigt die Protokolleinträge an, deren Zeichenfolgen Probleme mit drei Sternen (***) aufweisen. Informationen zur Interpretation dieses Abschnitts erhalten Sie unter „Ermitteln von Fehlern“ auf Seite 129. ----Potential Errors Detected --006425 0000075c LoadLibraryExW 'C:\Programme\Adobe\Reader 8.0\Reader\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***) 006427 0000075c LoadLibraryExW 'C:\Programe\Adobe\Reader 8.0\Reader\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***) 006428 0000089c nview.dll :1005b94b<-kernel32.dll:7c80ae4b *** LoadLibraryW ->HMODULE=7c800000h () *** GetLastError() returns 2 [0]: The system cannot find the file specified. 007062 0000075c LoadLibraryExW 'C:\Programme\Adobe\Reader 8.0\Reader\en-US\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***) 010649 0000075c LoadLibraryExW 'C:\Programme\Adobe\Reader 8.0\Reader\en-US\Microsoft.Windows.Common-Controls\Microsoft.Windows.Common-Controls.DLL' flags=2 -> 0 (failed ***) 019127 0000075c MSVCR80.dll :781348cc<-msvcrt.dll :77c10396 *** GetEnvironmentVariableA ->DWORD=0h (OUT LPSTR lpBuffer=*0h <bad ptr>) *** GetLastError() returns 203 [0]: The system could not find the environment option that was entered. 019133 0000075c MSVCR80.dll :78133003<-nview.dll :1000058c *** GetProcAddress ->FARPROC=*0h () *** GetLastError() returns 127 [203]: The specified procedure could not be found. 019435 0000075c MSVCR80.dll :78136e08<-dbghelp.dll :59a60360 *** Getfile type ->DWORD=0h ()*** GetLastError() returns 6 [0]: The handle is invalid. 019500 0000075c MSVCR80.dll :78134481<-nview.dll :1000058c *** GetProcAddress ->FARPROC=*0h () *** GetLastError() returns 127 [0]: The specified procedure could not be found. 019530 0000075c MSVCR80.dll :78131dcd<-dbghelp.dll :59a603a1 *** GetModuleHandleA ->HMODULE=0h () *** GetLastError() returns 126 [0]: The specified module could not be found. Beispiel für die Problembehandlung beim Dienstprogramm cmd.exe Im Problembehebungsbeispiel verpackt ThinApp das Dienstprogramm cmd.exe bei aktivierter Protokollierung. Dieses Beispiel zeigt, wie Sie durch Ausführen eines ungültigen Befehls das fehlerhafte Verhalten einer Anwendung simulieren können. Wenn das Dienstprogramm cmd.exe dazu aufgefordert wird, den Befehl foobar auszuführen, generiert das Dienstprogramm die Meldung foobar is not recognized as an internal or external command (foobar wird nicht als interner oder externer Befehl erkannt). Sie können die Trace-Datei und den Abschnitt Erkannte potenzielle Fehler (Potential Errors Detected) überprüfen, um die API-Funktionen zu suchen, die den Code GetLastError veränderten. Das Beispiel zeigt die Pfade C:\test\cmd_test\bin\foobar.*, C:\WINDOWS\system32\foobar.* und C:\WINDOWS\foobar als Speicherorte, an denen das Dienstprogramm cmd.exe nach dem Befehl foobar sucht. 132 VMware, Inc.