Download Mounting and Operating instructions

Mounting and Installation Instructions
CG-Controller CGLine 400
8.4 Status luminaires
Status and failures of all luminaires are displayed.
Line
1
2
3
4
5
6
7
Selection (Main menu)
Luminaire failure
Status luminaires

Test menu
Block, release

Setup CG-Controller
Setup luminaires
Memory card
Line
1
2
3 4
Display:
Str 1 Adr. 003 7FFFDE
„Name of luminaire“
Operation

Operation:
Menu One menu higher
 Pos.line:previous line
Pos.luminaire:previous luminaire
 Pos.line:next line
Pos.luminaire:next luminaire
Select luminaire
 Select line  Battery is charged
Battery is not charged
8.4.1 Status fault display
Priority
Zeile 3 (Anzeige)
high

1 Communication failure
2 Luminaire failure
3 Charge failure
4 Mains failure
5 Test ended successfully
6 DT runs (or shared DT runs)
7 FT runs

low
8 Status = operation off or
Status = operation on
Note: If the luminaire is blocked no DT/FT can run.
CEAG Notlichtsysteme GmbH
13