Download USER'S MANUAL

(4) Name & Function of
Operation Parts
1. Introduction
Name & Function of Operation Parts
Temp. Display
Temp. UP Button
Humi. Display
Humi. UP Button
Setting Temp. Up
Setting Humi. Up
Temp. DOWN Button
Humi. DOWN Button
Setting Temp. Down
Setting Humi. Down
D.T.G Button
Setting Button
Daily temperature
range set
Setting value check
Heater Lamp
Humi. working lamp
(Lighting when
working)
Temp. Gap Lamp
Water Supplement Lamp
D.T.G mode
(Blink when working)
Power Failure Alarm Function
Blink with power failure
(to remove, press SET button)
(Lighting when working)
(Blink with water shortage)
- Alarm for water supplement sounds in twice.
( First alarm with water shortage / Second alarm after 3 hours )
What’s ‘Temperature&Humidity Setting’?
This is that you set up temp.&humi. As you want to have inside of the machine.
[ Function Operation & Explanation ]
Function
※ If you want to change setting value, keep pressing "SET" button and change the value.
How to Operate
Temp.
Setting
Setting of needed temp.
Humidity
Setting
Setting of needed humidity.
Daily Temp. Gap
(D.T.G) set
D.T.G ON / D.T.G OFF
(one time a day for 3 hours
+ 1.5℃ operation)
Changing
Cels. & Fahr.
Changing Cels. & Fahr.
Initialization
Initialization
(Factory setting)
How to OFF
Humidification
Function
6
Explanation
below 40%
In case of incubation
at low humidity
DIGITAL INCUBATOR