Download USER'S MANUAL

Quick operation standby - The cleaning system operates continuously to quickly
discharge the pellets (this operating mode is initiated in case of failure, to
quickly extinguish the fire)
4.2 Display screens
The following paragraphs describe the information screens showing the current
operating parameters of the unit, which are displayed by pressing the
key:
The first screen shows a flow chart of a heating unit equipped with a puffer (Fig.
11), where the user can view the current water temperature on the supply and return
lines of the boiler and the water temperature inside the puffer, if applicable.
Fig. 11. Boiler screen
Touching the
key will display the parameters during operation (Fig. 12).
This permits the real-time viewing of supply line temperature, exhaust temperature
and the temperature readings of the puffer and/or boiler probes, if applicable.
24
*The trademark, products and burning procedure are protected under the Laws No. 64/1991, No. 129/1992, No. 84/1998