Download J-Flash ARM User Guide

62
8.1
CHAPTER 8
Target systems
Which devices can be programmed by J-Flash?
J-Flash can program external as well as internal flash. Any combination of ARM CPU
and external flash is supported if the flash chip is listed in section Supported Flash
Devices on page 64. Beside the listed flash chips is every CFI compliant chip supported. In addition, all types of flash interfacing are supported: 1x8bit, 2x8bit,
4x8bit, 1x16bit, 2x16bit, 1x32bit.
Regarding internal flash, J-Flash supports a wide range of microcontrollers. The next
section lists all supported micros.
If you need support for a chip or flash not listed in the tables below, do not hesitate
to contact us. Segger is constantly adding support for new devices. You may want to
request an updated list or have a look at http://www.segger.com for more up to date
information.
J-Flash ARM (UM08003)
© 2004-2009 SEGGER Microcontroller GmbH & Co. KG