Download User's Manual
Transcript
Setting the largest unit number for a PC(PLC) link The largest unit number can be set using system register no. 47 (using system register no. 57 for PC(PLC) link 1). [Sample setting] No. of units linked 2 4 n Setting contents 1st unit: Unit no. 1 is set 2nd unit: Unit no. 2 is set A largest unit no. of 2 is set for each. 1st unit: Unit no. 1 is set 2nd unit: Unit no. 2 is set 3rd unit: Unit no. 3 is set 4th unit: Unit no. 4 is set A largest unit no. of 4 is set for each. Nth unit: Unit no. n is set A largest unit no. of n is set for each. Note: • Unit numbers should be set sequentially and consecutively, starting from 1, with no breaks between them. If there is a missing unit number, the transmission time will be longer. • If fewer than 16 units are linked, the transmission time can be shortened by setting the largest unit number in system register no. 47 (in system register no. 57 for PC(PLC) link 1). • For all PLCs which are linked, the same value should be set for the largest unit number. • If there are fewer than 16 units linked and the largest unit number has not been set (default=16), or the largest unit number has been set but the unit number settings are not consecutive, or the unit number settings are consecutive but there is a unit for which the power supply has not been turned on, the response time for the PC(PLC) link (the link transmission cycle) will be longer. Reference: <7.5.5 PC(PLC) Link Response Time>. Setting PC(PLC) link switching flag PC(PLC) link switching flag can be set using system register no. 46. If it is set to 0 (default value), the first half of the link relays and registers are used. If it is set to 1, the second half of the link relays and registers are used. 7-66
Related documents
Panasonic FP0R Series PLCs User`s Manual
User Manual
Panasonic FP-X Programmable Controller User`s Manual
PROGRAMMABLE CONTROLLER FP0R User's Manual
Sistema de transmisión trasero
FP0 CC-Link Slave Unit - Panasonic Electric Works
USER`S MANUAL
USER`S MANUAL
USER`S MANUAL
Albatros Heat pump controller User Manual RVS61.843 AVS75.370
Icon
PROGRAMMABLE CONTROLLER FP