Download User's Manual
Transcript
B. Replace the lower thread trimming cover plate and the press plate cover Remove the currently installed lower thread trimming cover plate (B)① and the press plate cover②, and replace them with new lower thread trimming cover plate(C)③ and the press plate cover (B)④. ④ ② ③ ① [ Fig. 5 ] C. Install solenoid valve ⓐ Install the manifold bracket① on the lower part of the table using the screw②. ⓑ Remove the plug④ of the main solenoid valve③ and attach the joint⑤. ⓒ Use the air hose⑦ (ф6) to connect the joint⑤ and the nipple⑥. ④ ⑤ ⑦ ① ② ③ ⑥ ⑦ [ Fig. 6 ] D. Connect air hoses Air hoses can be connected to the solenoid valve respectively as shown in this figure. [ Fig. 7 ] 47