Download User's Manual
Transcript
FINA320 User's Manual 6.3.4 Warning and Error Displays Warning: • Warn1:UV lamp is not ready; Note: This printer has no this function. • Warn2:Press rob has not be pressed down. 1. Warn3:System is supplying ink. Error: When one of the errors listed below occurs during printing, the printer will run normally but give alarm for warning Err5:Ink refill overtime; Err6:The safety bottle is full; Err7:For solvent based printer:The waste ink bottle is full; For UV printer:The safety bottle in manometer is full; Err8:Null Errors listed below indicate the detail for further check when self test fails Err9:Y raster count direction differs from motion direction; Err10:Y raster signal is NOT detected; Err11:Y raster error too big; Err12:Reverse count abnormal; Err13:Self test for main board failed; Err14:Version of assistant board NOT matches main board; - 31 -