Download User's Manual

Transcript
FINA320 User's Manual
6.3.4 Warning and Error Displays
Warning:
•
Warn1:UV lamp is not ready;
Note: This printer has no this function.
•
Warn2:Press rob has not be pressed down.
1. Warn3:System is supplying ink.
Error:
When one of the errors listed below occurs during printing, the printer will run normally but give alarm
for warning
Err5:Ink refill overtime;
Err6:The safety bottle is full;
Err7:For solvent based printer:The waste ink bottle is full;
For UV printer:The safety bottle in manometer is full;
Err8:Null
Errors listed below indicate the detail for further check when self test fails
Err9:Y raster count direction differs from motion direction;
Err10:Y raster signal is NOT detected;
Err11:Y raster error too big;
Err12:Reverse count abnormal;
Err13:Self test for main board failed;
Err14:Version of assistant board NOT matches main board;
- 31 -