Download SERVICE MANUAL

<WSW18>
Selector No.
1
2
3
4
5
6
7
8
Function
Setting and Specifications
Header for fax
0: With header 1: Without header
No. 2
0
Detection enabled time for CNG
0
and no tone
1
1
3
0: 40 sec.
1: 0 sec. (No detection)
0: 5 sec.
1: 80 sec.
Not used.
Registration of station ID
Tone sound monitoring
0: Permitted
1: Prohibited
No. 7
0
0
1
8
0: No monitoring
1: No monitoring
0: Up to phase B at the calling
station only
1 1: All transmission phases both
at the calling and called stations
• Selector 1: Header for fax
The setting becomes effective only when do not add the header in the application of the
PC.
• Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone or by picking up the handset of the
machine, the machine can detect a CNG signal or no tone for the time length specified by
these selectors. The setting specified by these selectors becomes effective only when
selector 8 on WSW20 is set to "1."
• Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and Czech
models.
• Selectors 7 and 8: Tone sound monitoring
These selectors set monitoring specifications of the tone sound inputted from the line.
App. 1-23
Confidential