Download INSTALLATION AND OPERATING INSTRUCTIONS MODEL 4100
Transcript
SINGLE KEY FUNCTIONS cont. NAME - requests the Installation name and address provided it has been entered in the customer's panel. REQUEST CLIENT DATA 'C' key - Zones Open Report, 'E' key - Current Operating Mode, 'H' key - Outputs in Alarm Report. Enter the account number of the client and then select one of the three options 'ZONES--MODE --OUTPUTS' C ZONES - the control panel will return a numerical list of all the zones that are open on the system. E MODE - the control panel will return its current operating mode e.g. 'FULLY ARMED'. H OUTPUTS - the control panel will return the current state of outputs 1 to 50. NOTE: The control panel Access Code controls what data can be retrieved by the Station Operator. Attempts to carry out commands which are not allowed on the customer's control panel will cause an 'UNAUTHORIZED ACCESS ATTEMPT' response from the control panel and this will be printed out at the Central/Monitoring station as: 'date, time, LAST COMMAND SENT WAS NOT ACCEPTED BY CUSTOMER'. REQUEST DATE & TIME- Press the Help (H) key to view the receiver Date & Time when the display is showing other activity. 18