Download 2*15W @4Ω TA2024C Class-D Audio Amplifier User's Guide
Transcript
2*15W @4Ω TA2024C Class-D Audio Amplifier User’s Guide © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0 2*15W @4Ω TA2124 Class-D Audio Amplifier To keep the product in a best working condition and having a long service time, please operate it according to the relevant steps. The warranty lapses if the product is damaged because of incorrect use and your negligence. Warning: Never immerse the product in the rain or any other humid environment to prevent the fire or electric shock. Safety Precautions: 1. Carefully handle the power cord Do not damage or deform the power cord, or it will cause the electric shock or abnormal working. Removing the power cord from the socket, please confirm what you’ve hold is the socket not the power cord. 2. Never open the cover Do not open the cover in order to prevent the electric shock. Any problem, please contact us. 3. Never put other things in the product Do not put the metal in the product to prevent the liquid, or it will cause electric shock or abnormal working. Operation Precautions: 1. Care the power cord When you pull out the plug from the socket, do not pull the power cord but hold the plug. 2. Prevention of the high temperature Never put the product in the place exposed by the sun or near to the heating equipment. 3. Caution of the rack or chassis installation Never put this product in a closed rack. 4. Never open the cover It’s dangerous to open the bottom chassis or put your hand in the chassis, so do not open it. If this product has something wrong, pull out the power plug immediately and contact us. 5. Protect the chassis Avoid spraying insecticides near the product. Do not wipe the product with liquid like gasoline, water or other solvents, which easily cause the change of the quality or the color. Use soft cloth to clean dust. Please follow the instructions in this user’s manual when you use the chemical-treated cloth. 6. Prevent sundries from falling into this product Be especially careful to prevent the sundries like needles, hairpins, coins from falling into this product. 7. When you go out If you don’t use this product in a long time, e.g. when you go out for a trip, you must pull out the plug from the power socket. 8. Be care with humidity, water and dust Do not put this product in the highly humid position or the position with much dust. Do not place vases or something with water in on this product. 9. Please keep the manual well After reading this instruction, please keep it well along with the warranty card,which will be helpful when there are faults. Attention please. In order to explain clearly to users, the graphic representation in this user’s manual may be some different from the real device. © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Table of Contents Chapter 1. Overview ..........................................................................................................1 1.1 1.2 1.3 1.4 1.5 Overview .............................................................................................................. 1 Accessory ............................................................................................................ 1 Features ............................................................................................................... 1 Applications......................................................................................................... 2 Components and Function................................................................................. 2 1.5.1 Front panel ..................................................................................................................... 2 1.5.2 Back panel ...................................................................................................................... 3 1.5.3 Connection ..................................................................................................................... 3 Chapter 2. Hardware Detail ...............................................................................................5 2.1 2.2 2.3 2.4 2.5 2.6 Power Connection............................................................................................... 5 Switch Setting ..................................................................................................... 5 Input Connection................................................................................................. 6 Output Connection.............................................................................................. 6 Volume Control.................................................................................................... 7 LED Indicators..................................................................................................... 7 Chapter 3. Electrical Characteristics ...............................................................................8 3.1 Basic Parameters ................................................................................................ 8 3.2 Fault Tracing........................................................................................................ 8 Chapter 4. Mechanical Drawing......................................................................................10 Chapter 5. Appendix ........................................................................................................ 11 Chapter 6. Contact Us .....................................................................................................12 © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page i 2*15W @4Ω TA2024C Class-D Audio Amplifier NOTES: Product Version : Ver 1.1 Document Version : Ver 1.0 AA-AB340_Ver1.0_Page ii © 2004-2009 Sure Electronics Inc 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 1. Overview 1.1 Overview Welcome to use this self-made 2*15W audio amplifier board. This product is of small size, portable and elegant. Outer casing is fully made from aluminum alloy, so it is tough and durable. What more important is that it is an ideal Class-D audio power amplifier, integrated with TA2024C which is currently popular around the world. It not only provides dream sound but also has high efficiency, thus it can dissipate the heat after long-time working to ensure that the amplifier can works in a stable condition for long time. This product supports dual channel amplification of up to 15W each and Hi-Fi output. In order to ensure reproduction of perfect sound, we adopt volume potentiometers of high quality. Thus volume can be precisely adjusted and sound of high quality can be gained, although the product has worked for long time. With built-in MCU, this product can provide over/under voltage protection, low current protection and display LED state. This product can be powered by any DC power supply ranging from 9 to 14V. You can use it to drive any 4Ω or 8Ω passive speakers. FIGURE 1-1 OVERVIEW 1.2 Accessory Please check carefully the packing box, which contains the things as follows: 1. One main power amplifier 2. One user’s manual 1.3 Features 1 Ideal Class-D power amplifier 2 Range of power supply: DC9V—14V; 3 Fully made from aluminum alloy, compact, pleasing, fashionable and durable 4 Original TA2024 chip ensures the perfect sound. © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page 1 2*15W @4Ω TA2024C Class-D Audio Amplifier 5 Volume potentiometer of high-quality can adjust the volume precisely after long-time use 6 “Audiophile” Quality Sound: 0.1% THD+N @ 9W, 4Ω; 0.1% THD+N @ 6W, 8Ω; 7 High Power 15W @ 4Ω, 10% THD+N 10W @ 8Ω, 10% THD+N 8 High Efficiency 81% @ 15W, 4Ω 90% @ 10W, 8Ω 9 Suitable for the input of many kinds of audio signals 10 MCU based, more fashionable and attractive, creating dynamic LED breathing effect 11 Over / under voltage turn off 12 Over current protection 13 Over temperature protection 1.4 Applications 1 Home Theater 2 Powered Subwoofers 3 Powered DVD Systems 4 Mini/Micro Systems 5 MP3, Video CD output Amplification 1.5 Components and Function 1.5.1 Front panel Please refer to the corresponding pages for the detailed information. FIGURE 1-3 (POWER SWITCH, VOLUME KNOB) 1—power switch AA-AB340_Ver1.0_Page 2 2—volume knob © 2004-2009 Sure Electronics Inc Overview 1.5.2 Back panel FIGURE 1-4 (POWER INPUT, SPEAKER OUTPUT, AUDIO SIGNAL INPUT) 3—speaker output terminal 4—audio signal input terminal 5—serial number 6—power input 1.5.3 Connection © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page 3 2*15W @4Ω TA2024C Class-D Audio Amplifier FIGURE 1-5 CONNECTING SCHEMATICS AA-AB340_Ver1.0_Page 4 © 2004-2009 Sure Electronics Inc 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 2. Hardware Detail 2.1 Power Connection A voltage-regulated power of high-performance is necessary to provide basic and enough power so that this product could work stably, or any problem caused by poor power is out of the warranty. This product works at DC12V. Please refer to Chapter 3 for basic parameters Please connect the power voltage regulator with the audio power amplifier according to the following schematics: FIGURE 2-1 POWER CONNECTION SCHEMATIC 2.2 Switch Setting When the switch is ON, the machine is working and LED is lighting all the time. When the switch is OFF, the machine is in standby mode and LED shows breathing-effect lighting. © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page 5 2*15W @4Ω TA2024C Class-D Audio Amplifier FIGURE 2-2 SWITCH SETTING TABLE 2-1 SWITCH FUNCTION State Function ON Amplifier working OFF Amplifier not working LED state LED always lighting LED lighting in a breathing-effect state 2.3 Input Connection This product adopts RCA socket to input audio signal. You need a 3.5 to RCA cable which we do not provide in the accessory. FIGURE 2-3 INPUT CONNECTION 2.4 Output Connection This product adopts Banana socket with two output channels to output audio signal. Pay attention that LOUT+ and LOUT- are Left Output Channels, ROUT+ and ROUT- are Right Output Channels. AA-AB340_Ver1.0_Page 6 © 2004-2009 Sure Electronics Inc Hardware Detail FIGURE 2-4 OUTPUT CONNECTION Note: LOUT- and ROUT- are not in the same net and can not be connected together. Moreover, LOUT+, LOUT-, ROUT+, ROUT- can not be connected to the ground 2.5 Volume Control We adopt volume potentiometer of high-quality which can adjust the volume precisely after long-time use FIGURE 2-5 VOLUME CONTROL 2.6 LED Indicators This product is based on MCU which controls the indicators to display dynamic LED state and make this product more fashionable and attractive. Please refer to table 2-1 for details. © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page 7 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 3. Electrical Characteristics 3.1 Basic Parameters Basic parameter tested @DC12V 4ohm (except for the parameter marked with *) TABLE 3-1 BASIC PARAMETERS Parameter Min Typical Max Power voltage 9V 12V 14V Input Sensitivity 250mV 270mV 290mV Frequency 20Hz—-20KHz(±3dB) Output power* 9W@4ohm, THD+N<0.1% (VCC = 12V, RL = 4Ω) 12W@4ohms, THD+N<1% 15W@4ohms, THD+N<10% 10W @ 8ohms, THD+N<10% Output power * (VCC = 12V, RL = 8Ω) 0.03% THD+N @ 9W, 4Ω (THD+N) 0.1% THD+N @11W, 4Ω 0.1% THD+N @6W, 8Ω Efficiency 84% @ 15W, 4Ω 90% @ 10W, 8Ω Signal/Noise Ratio 90dB(A 90dB(A weighted) weighted) Minimum Load 3.2 ohms 4 ohms Input Impendence 10K 20K Power Gain 25dB 27.6dB Working Temperature 0℃ 25℃ Impendence Note: 55℃ *The chip specifications by Tripath. 放前,再次检查播放机是否发生故障 3.2 Fault Tracing If the amplifier does not work well, please read the following table: AA-AB340_Ver1.0_Page 8 © 2004-2009 Sure Electronics Inc. 2*15W @4Ω TA2024C Class-D Audio Amplifier TABLE 3-2 CORRECTIVE MAINTENANCE Situation Solutions No sound 1. Check if it is connected with the power and confirm that the voltage regulator works well. If not, connect the power according to the schematics. 2. Check if the signal input cable is connected correctly and if there is signal. If not, connect the lines according to the schematic and input the audio signal. 3. Check if the output cable is damaged and if the speaker works or not. If not, change the output cable and the speaker. 4. Check if the LED keeps on lighting or not. If not, restart it and ensure that the LED displays breathing effect when the switch is OFF. If it still doesn’t work, remove the power and contact us. Suddenly no 1. sound when Check if the product has worked for long time or if the audio signal is too high. If it is, turn off the power and turn it on again. the product is working LED off 2. Check if it is connected with the power and confirm that the voltage regulator works well or not. If not, correctly connect it to the power according to the schematics. 3. Check if the product works well or not. If there’s sound outputted, it’s that the LED has been damaged. LED on 1. Check if the product works well or not. If not, allocate the switch to OFF, remove the power, and then plug the power, finally turn on the switch. Note: If the problems above still cannot be solved, maybe the product has something wrong. Now please turn off the power, pull out the power cord from the socket and then contact us. Please refer to chapter five for our contact information. © 2004-2009 Sure Electronics Inc. AA-AB340_Ver1.0_Page 9 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 4. Mechanical Drawing FIGURE 4-1 FRONT AND BACK PANELS FIGURE 4-2 SIDE VIEW Note: AA-AB340_Ver1.0_Page 10 The unit of all the data in the figures above is millimeter. © 2004-2009 Sure Electronics Inc. 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 5. Appendix FIGURE 5-1 CIRCUIT SCHEMATIC R1 U1 VDD TA2024/TSSOP 1 20k RB1 2 1 C2 0.1uF 1 2 10K/EVM3ESX50B14 2 Y CPUMP DCPA2 PGND1 DCAP1 NC 36 Y 35 3 3 R5 VDD 34 1 SS14 20k D1 2 32 30 C10 9 OUTM2 IN1 VDD2 1 D2 2 R17 20k 14 2 VDD 20k C24 VP2 NC IN2 DGND 25 1 0.1uF 1 2 1 1 2 2 R13 C18 Y C17 + 0.1uF 16V/22uF/TAN NC R14 C15 0.47uF D3 10R 10R 22 21 AGND3 PGND2 2 C20 C21 0.01uF 1nF SS14 C23 D4 0.47uF SLEEP FAULT 20 1 2 VDD 1 SLEEP 18 Y 19 FAULT C26 0.1uF 10K/EVM3ESX50B14 R21 3 20k R22 20k VCC VCC VDD +5V 2 1 3 C34 + C27 C36 0.1uF R24 1k +5V VDD R27 R28 10K 4.7K U3 PIC16F54I/SOIC C39 RA0 MCLR/VPP RA1 OSC1/CLK RA2 RA3 T0CLK RB0 RB1 VDD RB2 GND RB3 RB4 RB5 RB6 RB7 OSC2/CLKOUT R30 470R MCLR 22pF C40 0.1uF 2 2 0.1uF 1 1 C38 4 16 3 14 5 +5V 1 100uF/16V 2 R23 3k 2 + C28 0.1uF 1 100uF/16V 2 100uF/16V 2 100uF/16V 2 100uF/16V 2 2 100uF/16V 2 2 2 0.1uF C35 + 100uF/16V 100uF/16V 1 C33 + 2 C32 + 1 C31 + 1 C30 + 1 1 C37 1 C29 + 1 1 SW 3PDT_0 +5V 2 VOUT 4 VOUT 1 VIN 1 3 2 D51N5822 1 2 1 DJ005B 1 2 3 VAD J U2 LM317EMP/SOT-223 SW1 J4 © 2004-2009 Sure Electronics Inc. 17 18 1 2 6 7 8 9 10 11 12 13 15 VDD R32 R33 NC NC +5V J5 MCLR MUTE SLEEP RB1 R25 R26 220R 220R D6 D7 LED(翠绿) LED(翠绿) FAULT R31 4.7k RB6/ICSPCLK RB7/ICSPDAT 1 2 3 RB7/ICSPDAT 4 RB6/ICSPCLK 5 6 3 4 5.08型条形连接器 2 C19 0.22uF L4 10uH 2A 2 1 23 1 1 1nF 1 24 100pF 2 C13 1 OUTP2 BIASCAP 17 R20 L3 10uH 2A SS14 J2 2 1 2 1 CH2 C25 VDD2 NC 16 R19 1nF 1 MUTE 13 15 20k 10R 1 12 Y R15 26 10k R18 10R 1 C16 0.1uF MUTE 2 1 R16 1uF 2 2 2 11 20k C22 1 27 10k VDD 0.47uF 2 R12 L2 10uH 2A 1 1 R13 R23 1uF 2 2 1 C14 1 6 C11 2 10 5 R12 R22 R8 2 4 RK09712200MT J3 VP1 28 R10 20k R11 R21 R7 C12 2 3 OUTM1 SS14 1 2 V5A 29 2 1 VDD1 16v /22uF/TAN 2 AGND2 1nF Y 0.1uF 8 C8 0.01uF C6 0.47uF 0.22uF VDD C9 1 VDD1 2 OVERLOADB C7 C5 31 1 OUTP1 2 REF 1 6 R6 8.25K/1% 7 1 Y R9 L1 10uH 2A 1 2 Y NC 1 AGND1 2 5 VDDA 2 V5D 1 1 C4 0.1uF 2 1 + 100pF 33 2 4 20k 2 2 1 R4 C3 2 CH1 +5VGEN 1uF 2 1 2 R2 J1 C1 1 R29 0R ICD Connector AA-AB340_Ver1.0_Page 11 2*15W @4Ω TA2024C CLASS-D AUDIO AMPLIFIER USER’S GUIDE Chapter 6. Contact Us Sure Electronics Co., Ltd. 5F, Zone A, Qinhuai Technology Innovation Center 105-2 DaMing Rd (ZIP:210022) Nanjing P.R.China Tel: +86-13601408832 (For technical questions only) +86-25-66606340 (English service, from GMT1-10AM) Fax: +86-25- 66606341-866 Website: www.sure-electronics.com www.sure-electronics.net AA-AB340_Ver1.0_Page 12 © 2004-2009 Sure Electronics Inc.