Download PowerLogic User's Guide - Electrical and Information Technology

Creating Reports
Unused
The Unused report lists all unused gates and pins in the schematic. Use this report for
troubleshooting and to maximize part usage. The Unused report first lists unused parts
and gates, followed by a list of unused pins on each part.
The format for the Unused report follows:
UNUSED ITEMS REPORT — \PADSPWR\LOGICFILES\filename.SCH —date time
UNUSED GATE LIST
part type
gate name
gate name
part type
gate name
gate name
UNUSED PINS LIST
part type
ref des. pin number ref des.pin number
Part Statistics
The Part Statistics report lists information about all parts in the schematic. The report
includes the reference designator name and part type for each part in the schematic and
for each pin on the part, the pin type, sheet location, and signal name. Use this report to
locate possible errors in the schematic.
The format for the Part Statistics report follows:
PART STATUS REPORT — \PADSPWR\LOGICFILES\filename.SCH —date time
Ref name
Part type
ref.pin no. [pin type - sheet no.] signal name
ref.pin no. [pin type - sheet no.] signal name
ref.pin no. [pin type - sheet no.] signal name
Ref name
Part type
ref.pin no. [pin type - sheet no.] signal name
ref.pin no. [pin type - sheet no.] signal name
PowerLogic User's Guide
11-13