Download User Guide - BrightSign

6
Under Logging, check any of the following boxes to create the selected type of logs:
• Enable playback logging: Creates a log that specifies when a playlist was used.
• Enable event logging: Creates a log that specifies when events are triggered.
• Enable diagnostic logging: Creates a log that provides troubleshooting information.
7
Create and install the setup file:
a Click Create Setup Files.
b Select an SD or SDHC card or a USB Flash drive to store the setup files.
c Turn off the BrightSign unit and insert the card or Flash drive into the unit.
d Turn on the BrightSign unit.
•
•
•
• 40
•
•