Download ProofMaster Calibrator v3 User Guide
Transcript
ProofMaster Calibrator User Guide Editing the paper color simulation (white point correction) 51 Editing the paper color simulation (white point correction) About paper color simulation (white point correction) If you selected the option Paper Color Simulation when you configured your queue (Proofing tab of the Queue Options), you can change the simulation of the paper color in ProofMaster Calibrator. This function changes the white point in the printer profile in accordance with the reference profile. To edit the paper color simulation (white point correction) Proceed as follows: 1 In ProofMaster Calibrator, click the DeviceLink tab. 2 Select the queue of which you want to change the paper color simulation. A reference profile and a printer profile need to be specified for this queue. 3 Fill in the target values ( in Lab or LCh) of the simulation of your choice. Notice the CMYK values of the inks at the bottom of the White point correction dialog box. 4 Click Print to print two patches: one with the current values and one with the adjusted values. A job named “paper white target” is added to the queue. If the values you specified are out of the printer’s gamut, it will be indicated on the print.