Download Installation Manual - Syd-Com
Transcript
2.6 Connection of Extensions 2.6.3 Digital EXtra Device Port (Digital XDP) Connection A DPT can be connected to another DPT on the Digital XDP connection. In addition, a DPT connected to a Super Hybrid Port can also have an SLT connected in Parallel mode or XDP mode. Notes • • • Both DPTs must be KX-T7600 series DPTs (excluding KX-T7640). Parallel mode or XDP mode can be selected through system programming. If XDP mode is enabled through system programming, parallel connection is not possible. Refer to "1.10.9 Parallelled Telephone" and "2.1.1 Extension Port Configuration" in the Feature Guide for further information. With KX-T7600 Series DPT (except KX-T7600E Series) Using a Modular T-Adaptor To a Super Hybrid Port Modular T-Adaptor 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "D1" and "D2". 4-conductor wiring cord Connect pins "D1" and "D2". SLT Master DPT Slave DPT Back View of DPTs TO TEL TO MAIN UNIT / PABX Cable ø 0.4 mm: ø 0.5 mm: ø 0.6 mm: CAT 5: TO MAIN UNIT / PABX Maximum Distance Under 30 m Under 50 m Under 60 m Under 50 m Master DPT To a Super Hybrid Port 76 Installation Manual Slave DPT