Download User's Manual - X-Rite

Transcript
Charging the Battery Pack. . . continued
AC Adaptor Connection Procedure
1. Plug the small connector end of the AC adaptor into the adaptor jack
on the back of the instrument or the battery pack.
2. Plug the adaptor into the AC wall outlet.
Adaptor Jack
Small Connector
AC Wall Outlet
Adaptor
Instrument Charging
Battery Pack Charging
AC Wall Outlet
Adaptor Jack
Small Connector
Adaptor
☛
The unit will not lose any of the preset information (i.e., cal, refs, etc.) if the battery pack is removed.
Refer to Battery Pack Replacement in Section 8 for proper removal and installation.
1-7