1
Download Blizzard Service Manual
Transcript
Figure 62 4.8.7. Assembling / Replacing the Wheel Lock Lever Extension Open the screw connection of the retaining cable on the wheel lock body and completely remove the screw (Fig. 62). Remove the wheel lock lever extension and replace it with a new one. Attach the eyelet of the new brake cable to the bore hole of the wheel lock body and tighten the screw. Plug the wheel lock lever extension onto the wheel lock lever. 31 647G429_Blizzard_Inhalt GB.indd 31 05.04.2007 12:36:14 Uhr
