Download Trapeze RingMaster User's Guide

2. In the Tasks panel, click Tools.
3. In the Wiring Closet/Misc area under Coverage Area, click the
(Insert Wiring Closet) icon.
4. Click in the floor display where you want to place the wiring closet. The Wiring Closet
Properties dialog appears.
5. In the Name field, type the name of the wiring closet (1 to 60 characters, with no tabs).
6. If you have not defined an MX in RingMaster, click Finish to save changes. Otherwise, go to
Step 7. RingMaster determines how many MXs are needed when computing the number of
AP access points required and automatically creates them.
7. To add a previously created MX to a wiring closet, select the MX in the Available Devices list,
then click Add to move it to the Current Devices field.
To remove an MX from a wiring closet, select the MX in the Current Devices list, then click
Remove to move it to the Available Devices field. If there are two or more MXs in a wiring
closet, you can change the order RingMaster uses to check switches for free ports. If there
are no free ports on listed switches, RingMaster creates and inserts a new MX in the wiring
closet. Select an MX and click Up or Down to change the order of the MXs.
8. Click Finish to save changes.
190
Coverage and Capacity Planning
Copyright © 2011, Juniper Networks, Inc.