Download IPCAM User's Guide

3.10.
Tools
In this page, user can amend administrator’s password, restore default and upgrade
firmware that should download to local PC before upgrades. As follows:
1.
Click 【Browser】 and find upgraded file
2
Select this document and click 【ok】, path will display in the space
3
Click 【Start Upgrade】 and it begins about one minute. After a while of time the
IPCAM restart and link error display on viewer’s browser. Please do NOT restart or
shut down power during firmware upgrade period.
Picture 3.10 tools setup interface
tools
Change Password
Input current and new password, then
confirm it.
Restore
Factory
All restore to factory default
Defaults
Reset
Parameter keeps same after restart
Upgrade Firmware
Click 【 Browser 】 to select path for
upgrade file, then click 【upgrade now】
】
20