Download User's Guide - Chiyu

Transcript
Keep Alive Check
Setting
Factory Default
Necessity
Disable/Enable
Disable
Required
Disable: Disable the check of TCP connection is still alive or not.
Enable: BF-2300 automatically send a Ping request to peer per each 30 seconds, the TCP
connection will be terminated if no response of Ping reply from peer.
Max TCP Connection
Setting
Factory Default
Necessity
1,2,3,4
1
Required
The allowed TCP connections accept by BF-2300 simultaneously. It is usually used when user
needs to receive data from different hosts simultaneously. When multiple hosts establish TCP
connection to BF-2300 at the same time, it will duplicate serial data and transmit to all hosts.
When data comes from Ethernet port, it is sent on first-in-first-out basis to serial port.
TCP Client
Destination IP Address1&Port
Setting
Factory Default
Necessity
E.g., 192.168.0.1
None
Required
0 to 65535
50000
Required
18