Download PL-5900 Series User Manual

Chapter 5 - System Setup
5.2.5 Integrated Peripherals
Select Integrated Peripherals from the Main Menu and the following screen will
appear.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Integrated Peripherals
SIS 540 OnChip PCI Device
SuperIO Device
USB Controller
USB Keyboard Support
Expansion mode Support
IDE HDD Block Mode
Init Display First
System Share Memory Size
Press Enter
Press Enter
Enabled
Enabled
Disabled
Enabled
PCI Slot
8 MB
Item Help
Menu Level
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
SIS 540 Onchip PCI Device
This setting enables the onboard Ethernet interface. Press [Enter] to display the
menu items for this setting. The available settings are [Enabled] and [Disabled].
The factory default setting is [Enabled] and is recommended for most users.
Super 10 Device
This setting configures the various onboard interfaces. Press [Enter] to display the
menu items for the setting.
"5.2.6 Super 10 Device"
USB Controller
This setting determines whether to use the USB controller. The available settings
are [Disabled] and [Enabled]. The factory default setting is [Enabled] and is
recommended for most users.
USB Keyboard Support
This setting determines whether to use the USB interface keyboard. The available
settings are [Disabled] and [Enabled]. The factory default setting is [Enabled] and
is recommended for most users.
Expantion mode Support
This setting determines if the VGA Expansion Mode is supported or not. Settings
available are [Disabled] and [Enabled]. The factory setting is [Disabled].
PL-5900 Series User Manual
5-9