Download Operators Manual

3.
Operation
3.1
General Information
The Gazeeka Model 870S always reports the moisture on a WB (as received) basis.
Note that the instrument will cease to measure moisture whilst its parameters are
being edited.
3.2
Editing Parameters using the Keypad
The main interface between the Model 870S Moisture Monitor and the user is
provided by a 7-key keypad, situated on the LCD display unit in the tractor cabin and
labeled as follows.
MENU
ITEM
F1
FIELD
UP
ENT
DOWN
The functions of these keys are as follows:
MENU
ITEM
FIELD
ENT
Used to move through the Menus while in Setup Mode.
Used to move through different items in each Menu
Used to move the cursor across the field when editing values.
Used to initiate some Item actions.
F1
UP
DOWN
Used to move between modes at certain Items
Used to increase the value being highlighted by the cursor.
Used to decrease the value being highlighted by the cursor.
Your Model 870S Moisture Monitor can be in one of only two operational modes:
Setup Mode or Analyze Mode.
When power is first applied to the Model 870S Moisture Monitor, the instrument
automatically goes into Analyze Mode ready to measure moisture in a bale.
In Analyze Mode, use the F1 key to select the Setup Mode.
See Appendix A for the Menu structure, Item and Parameter listings.
You use the [menu] key to move through the menu list and the [item] key to move
through the items on each menu. (See Appendix A for a complete list).
The Model 870S uses a 2 line, 16 character per line LCD display to allow you to view
the Items in different Menus and their values. You may also use the keys to change
some of the values, to allow the Model 870S to adjust to your conditions.
870S V13p00
18