Download USER GUIDE

Policy Routing
This function allows you to add policy rules to certain situations.
Figure 57: Advanced - Routing - Policy Routing
Click Add to display the following screen.
Figure 58: Advanced - Routing - Add Policy Route
Enter a, select the LAN port to be used, enter the source IP address
FIELD
DESCRIPTION
Policy Name
A user defined name for the policy route.
Physical LAN Port
The LAN port to be used for the policy.
Source IP
The IP address of the LAN device involved with the policy.
Use Interface
Select the Interface that the policy will employ.
Gateway
Enter the gateway address.
Dynamic Routing
To activate this option, select the Enabled radio button for Global RIP Mode.
To configure an individual interface, select the desired RIP version and operation, and enter a check in the Enabled checkbox for
that interface. Click Apply/Save to save the configuration and to start or stop dynamic routing.
Figure 59: Advanced - Routing - Dynamic Routing
NetComm 3G29WN2 Dual ADSL2+/3G Gateway
49
YMLO-3G29WN2
www.netcomm.com.au