Download USER GUIDE

NETCOMM GATEWAY™ SERIES – 3G29WN2 – Dual ADSL2+/3G Gateway
Appendix A: Print Server
These steps explain the procedure for enabling the Print Server.
1. Enable Print Server from the Advanced menu in the Web User Interface of the router.
2.
Select Enable on-board print server checkbox and enter the printer name and make and model.
NOTE: The Printer name can be any text string up to 40 characters. The Make and model can be any text string up to 128
characters.
3. Press the Apply/Save button to save the new settings.
Figure 87: Advanced - Print Server Settings
For Windows Vista/7
These steps explain the procedure for enabling the Printer Server.
1.
Enable Print Server from Web User Interface.
Select Enable on-board print server checkbox and enter the printer name and make and model.
NOTE: The Printer name can be any text string up to 40 characters. The Make and model can be any text string up to 128
characters.
Figure 88: Advanced - Print Server Settings
2. Go to the control panel, and select ‘Printers’ if you are using Windows Vista or select “Devices and Printers” if you
are using Windows 7.
3.
Once in the ‘Printers’ page, click the ‘Add a printer’ button as shown below.
YMLO-3G29WN2
www.netcomm.com.au
NetComm 3G29WN2 – Dual ADSL2+/3G Gateway
66