Download USER GUIDE

DSL
This page allows the user to modify the DSL modulation settings on the unit. By changing the settings, the user can specify which
DSL modulation that the modem will use.
Figure 63: Advanced - DSL Settings
For advanced DSL options press the Advanced Settings button.
Figure 64: Advanced - DSL - Advanced Settings
The DSL advanced settings relate to test mode settings. The default selection is ‘Normal’.
ADSL Tone Settings
For ADSL Tone Settings select the ‘Tone Selection’ button on the DSL Advanced Settings page.
The frequency band of ADSL is split up into 256 separate tones, each spaced 4.3125kHz apart. With each tone carrying separate
data, the technique operates as if 256 separate routers were running in parallel. The tone range is from 0 to 31 for upstream traffic
and from 32 to 255 for downstream traffic. Do not change these settings unless you are directed by your Internet Service Provider.
NetComm 3G29WN2 Dual ADSL2+/3G Gateway
51
YMLO-3G29WN2
www.netcomm.com.au