1
Download USER GUIDE
Transcript
ADSL The following graphic shows the ADSL Network Statistics screen. The Reset button (located at the bottom of the screen) can be used to reset statistics. The bit error rate can be tested by clicking the ADSL BER Test button. Figure 82: Status - Statistics – ADSL Route Select Route to display the paths the Router has found. Figure 83: Status - Route ARP Click ARP to display the ARP information. This option can be used to determine which IP address / MAC address is assigned to a particular host. This can be useful when setting up URL filtering, Time of Day filtering or Static DHCP addressing. Figure 84: Status - ARP NetComm 3G29WN2 Dual ADSL2+/3G Gateway 61 YMLO-3G29WN2 www.netcomm.com.au
