Download User's Guide
Transcript
D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch Exist Denotes whether a switch does or does not exist in a stack. Priority Displays the priority ID of the Switch. The lower the number, the higher the priority. The box (switch) with the lowest priority number in the stack denotes the Master switch. The DGS-3324SRi will always be the master switch if configured with DGS-3324SR switches. Prom Version Shows the PROM in use for the Switch. This may be different from the values shown in the illustration. Runtime Version Shows the firmware version in use for the Switch. This may be different from the values shown in the illustrations. H/W Version Shows the hardware version in use for the Switch. This may be different from the values shown in the illustration. Device Status The Device Status window can be found in the Monitoring menu by clicking the Device Status link. This window shows the status of the physical attributes of the Switch, including power sources and fans. Figure 6- 15. Device Status window The following fields may be viewed in this window: Parameter Description ID The Box ID of the Switch in the switch stack. Internal Power A read only field denoting the current status of the internal power supply. Active will suggest the mechanism is functioning correctly while Fail will show the mechanism is not functioning correctly. External Power A read only field denoting the current status of the external power supply. Active will suggest the mechanism is functioning correctly while Fail will show the mechanism is not functioning correctly. Side Fan A read only field denoting if the side fan of the Switch is functioning properly or not. Back Fan A read only field denoting if the back fan of the Switch is functioning properly or not. MAC Address This allows the Switch’s dynamic MAC address forwarding table to be viewed. When the Switch learns an association between a MAC address and a port number, it makes an entry into its forwarding table. These entries are then used to forward packets through the Switch. 151