Download AS1029-E - IBC Water
Transcript
REGENERATION FREQUENCY The softener can be set to regenerate from once per day up to once per 12 days. To determine the correct number of regenerations refer to the Tables below for the model softener installed. The skipper wheel tabs are pushed in fully for the days selected for regeneration. The factory setting for the actual time of regeneration is 3am. The tables below are based on an average daily water usage of 250 litres per person and using the maximum salt dosage to provide maximum capacity. The tables indicate a suggested number of regenerations per 12 day period. The tabs selected will have to suit the suggested number eg. For 6 regenerations, select tabs, 1, 3, 5, 7, 9, 11. From the left column locate the number in the family, reading along and down from the hardness column, where the column intersect gives the number of regenerations for every 12 days. MODEL AS0715-E No. in family 1 2 3 4 5 6 Hardness MG/L CACO3 50 1 1 1 1 1 1 100 1 1 1 2 2 2 150 1 1 2 2 3 3 200 1 2 2 3 3 4 250 1 2 3 3 4 6 300 1 2 3 4 6 6 350 2 3 4 6 6 400 2 3 4 6 6 450 2 3 4 6 500 2 3 6 6 400 1 2 3 4 4 6 450 1 2 3 4 6 6 500 1 2 3 4 6 6 400 1 2 2 3 4 4 450 1 2 3 3 4 6 500 1 2 3 4 4 6 MODEL AS0922-E No. in family 1 2 3 4 5 6 Hardness MG/L CACO3 50 1 1 1 1 1 1 100 1 1 1 1 1 2 150 1 1 1 2 2 2 200 1 2 2 2 2 3 250 1 1 2 2 3 3 300 1 2 2 3 3 4 350 1 2 3 3 4 6 MODEL AS1029-E No. in family 1 2 3 4 5 6 AS1029-E Hardness MG/L CACO3 50 1 1 1 1 1 1 100 1 1 1 1 1 1 150 1 1 1 1 2 2 200 1 1 1 2 2 2 250 1 1 2 2 2 3 300 1 1 2 2 3 3 350 1 2 2 3 3 4 Page 6