Download Installation Manual

B-500-MTRX-230-4x4 Installation Manual
11.1.4. Resetting to Factory Defaults
This procedure resets the B-500-MTRX-230 to factory defaults:
•
EDIDs - 1080p Stereo (embedded 2)
•
I/O - All Outputs set to Input 1
•
1CAT EDIDs cleared, DHCP - Enabled.
Reset Factory Defaults
1. Press DEFAULT
2. Press DEFAULT
3. Press DEFAULT
4. Press DEFAULT
5. Press ENTER
Display Readout
(Example)
E--DD
D-
Note: R
esetting factory defaults can take up to 2 minutes to complete. Wait until the screen displays an output and input
selection of 1.1 before attempting further setup or use.
Pg. 23
www.snapav.com Support: 866.838.5052