Download User Manual - D-Link

Wireless Controller
User Manual

Client Association Failure

Client Authentication Failure
Client State Change Traps: If you enable this field, the SNMP agent sends a trap for
one of the following reasons associated with the wireless client, each containing
location objects:

Client Association Detected.

Client Disassociation Detected.

Client Roam Detected.
Peer Controller Traps: If you enable this field, the SNMP agent sends a trap for one
of the following reasons associated with a peer controller.

Peer Controller Discovered

Peer Controller Failed

Peer Controller Unknown Protocol Discovered.
Configuration command received from peer contr oller. (The controller need not be
Cluster Controller for generating this trap.
RF Scan Traps: If you enable this field, the SNMP agent sends a trap when the RF
scan detects a new AP, wireless client, or ad -hoc client.
Rogue AP Traps: If you enable this field, the SNMP agent sends a trap when the
controller discovers a rogue AP. The agent also sends a trap every Rogue Detected Trap
Interval seconds if any rogue AP continues to be present in the network.
Wireless Status Traps: If you enable this field, the SNMP agent sends a trap if the
operational status of the Unified Wireless controller (it need not be Cluster Controller
for this trap) changes. It sends a trap if the Channel Algorithm is complete or the Power
Algorithm is complete. It also sends a trap if any of the following databases or lists has
reached the maximum number of entries:
1- Managed AP database.
2- AP Neighbor List.
3- Client Neighbor List.
4- AP Authentication Failure List.
326