Download DevKit8500D/A User Manual

When the above steps are finished, the current directory will generate linux-2.6.32-devkit8500,
u-boot-03.00.02.07,
x-loader-03.00.02.07,
rootfs
and
rowboat-android-froyo-devkit8500
directories.
3.4.2.2 X-loader image generation
DevKit8500 supports TF Card boot or NAND boot. The burned x-loader image files are different
with the different boot modes, and the corresponding methods for mapping are different too.
We will introduce the generation of x-loader image file under different boot modes.
1) To generate x-loader image file MLO used for SD card start-up
cd x-loader-03.00.02.07
make distclean
make devkit8500_config
make
signGP x-load.bin
mv x-load.bin.ift MLO
When the above steps are finished, the current directory will generate the file MLO which we need.
2) To generate the x-load.bin.ift_for_NAND start-up
To alter the file x-loader-03.00.02.07/include/configs/devkit8500.h and annotate the following:
vi x-loader-03.00.02.07/include/configs/devkit8500.h
// #define CONFIG_MMC
1
Cross compilation:
cd x-loader-03.00.02.07
make distclean
make devkit8500_config
make
signGP x-load.bin
mv x-load.bin.ift x-load.bin.ift_for_NAND
When
the
above
steps
are
finished,
the
current
directory
will
generate
the
file
x-load.bin.ift_for_NAND which we need.
3.4.2.3 U-boot image generated
cd u-boot-03.00.02.07
34