1
Download Service Manual
Transcript
SERVICE Whirlpool Europe Customer Services ADG 758 Service Manual Dishwasher integratable ADG 758 Model Version ADG 758 8511 155 10811 Page Technical data 2-3 Spare part list 4-5 Exploded view 6-9 Wiring diagram 10 Circuit diagram 11 Text/Legend 12 - 14 This documentation is only intended for qualified technicians who are aware of the respective safety regulations. Date: 16.11.2005 (Mod. 01) Subject to modification Document-No.: 4812 728 11715 16.11.2005 / Page 2 Doc. No: 4812 728 11715 ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE Technical data possible only after pressing the start button for longer then 1.5 sec. (Break by customer) Dimension Height Width Depth Weight 82.0 - 87.0 cm 44.8 cm 57.0 cm 36 kg Wooden door for Full Door appliances Thickness min. Thickness max. Width min. Width max. Height min. Height max. Weight min. Weight max. Max. stick out over lower edge of appliance door Height of plinth min. 16 20 442 448 650 720 2.5 6.2 mm mm mm mm mm mm kg kg 90 93 mm mm Electronic boards Service boards see spare part list Succession of programs Programs Succession see program diagram Prewash, cold Delicate 45˚ Bio/ Eco 55˚ Normal 65˚ Intensive 70˚ Datas Energy Label Reference program Energy Performance Cleaning Performance Drying Performance Bio/ Eco 55˚ B A B Alarms Refill rinse aid Refill salt Option A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position. If the tank temperature is over 50 ˚C the program will restart 15 seconds after the door is closed to avoid overpressure inside the tank. Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program. Volume Detergent Clear rinse containing Adjustable Rinse aid dosage Capacity Water connection up to 48 ccm 140 ccm 1-6 1-4 ccm 10 stand. place settings 60 ˚C Electrical base data Voltage Frequency Total power Fuse 220-230 50 2.2 10 V Hz kW A 220-240 50 150 2950 6 V ± 10% Hz W RPM µF ~ 44 ~ 50.5 Ω Ω 220-240 50 34/ 30 155/ 170 1 20 V ± 10% Hz W Ω ± 10% m l/min Spray pump motor Voltage Frequency Power consumption Rotation Capacitor Resistance (20˚C) primary winding start winding ± 7% ± 7% Drain pump motor Voltage Frequency Power consumption Resistance winding Maximal head Maximal flow rate Delay function Heating - 1 Element flow through system Program information End - Acoustic signal All programs will be locked after start. Changing the program or finishing the program will be Voltage Power consumption Resistance Thermal protection Thermal Fuse 230 2.04 25 98 206 V kW Ω ± 10% ˚C ± 5˚C ˚C ± 10˚C SERVICE Whirlpool Europe Customer Service ADG 758 8511 155 10811 16.11.2005 / Page 3 Doc. No: 4812 728 11715 Technical data Water safty options Safty system against water-leakage Waterstop system Aquastop + floater switch (Floater switches of the inlet valve and on the drain pump) Aquasafe Water inlet valve/ Aquastop Voltage Frequency Inlet pressure Flow rate Resistance 220-240 50/ 60 0.5 - 10 3.5 ~ 4.12 V ± 10% Hz bar l/min ± 7% kΩ Regeneration and Volumes Salt container volume Volume for regeneration Default Water hardness setting 1.5 320 kg cm3 3 Regeneration valve Voltage Frequency Resistance 220-240 60 ~ 3.75 V Hz kΩ Coil of dispenser 220/ 240 V ± 10% 50/ 60 Hz ~ 1.33 kΩ Voltage Frequency Resistance Level pressure switch and Door micro switch Max carrying capacity of the contacts 250 V 14 (4) A ~ 14 ~ 11,5 ~ 9,5 kΩ kΩ kΩ 230 0.5 V W 250 3 (4) V W 250 16 (4) V W NTC 23 ˚C 25 ˚C 30 ˚C Indication lights Voltage Power consumption Micro switch safty device Voltage Power consumption Push buttons Voltage Power consumption Suppressor Capacitor (Y) Resistance 1 x 0.1 µ F (X1) + 2 x 2700 pF 2.2 MΩ Adjustment on display H0 H1 H2 H3 H4 H5 German degrees ˚dH <9 < 15 < 23 < 34 < 46 < 58 French degrees ˚fH < 15 < 25 < 40 < 60 < 80 < 100 Regenaration Disabeld Every 5 cycles Every 4 cycles Every 3 cycles Every 2 cycles Every cycle 16.11.2005 (Mod. 01) / Page 4 Doc. No: 4812 728 11715 ADG758 8511 155 10811 Whirlpool Europe Customer Service SERVICE Spare part list Model Service No. Version ADG 758 851115510811 851115510811 Pos. No. 12NC Code Description Pos. No. 12NC Code Description 004 0 011 0 012 2 012 3 022 0 4812 905 08205 4812 905 08128 4812 905 08148 4819 905 01036 4812 905 08544 Drip tray assy Foot Fixation Fastener Side panel left 450 1 480 3 490 0 552 0 571 0 4812 905 08538 4819 905 00002 4812 905 08155 4812 210 78011 4812 905 08369 Connection SP/heatingelem. Gasket Cable Thermostat Inlet valve LV2405 022 1 024 0 040 0 040 1 040 2 4812 905 08545 4812 905 08211 4812 905 08161 4812 905 08162 4812 905 08241 Side panel right Container Frame right Frame left Hinge right 571 1 583 0 620 0 620 1 620 2 4812 905 08158 4812 905 08194 4812 905 08824 4812 905 08138 4812 905 08638 Interf.filter Pressostat Timer 220730002*16700000 Protector User board 040 3 040 4 044 0 053 0 065 0 4812 905 08242 4812 905 08208 4812 905 08234 4812 905 08202 4819 905 00692 Hinge left Container Spring Door Plinth Insulation door 621 0 633 0 680 0 680 1 680 2 4812 905 08534 4812 905 08528 4819 905 01044 4819 905 00026 4819 905 00027 Switchmechanism Microswitch Combidosage electr. Indicaton Gasket border Fastener combidosage 065 8 065 9 066 0 100 1 103 0 4812 905 08227 4812 905 08228 4812 905 08238 4819 905 00001 4812 440 19835 Batten left Batten right Cover Spacer Rubber Door outer 700 0 700 1 701 1 710 0 710 2 4812 905 08347 4812 905 08373 4812 905 08337 4812 905 08154 4812 905 08327 Hose, inlet Hose Bracket valve Monoblock with Reed Threaded ring 120 0 130 0 131 0 176 1 191 0 4812 905 08356 4812 905 08527 4812 905 08536 4819 905 00036 4819 905 00569 Door,inner Door lock Lock hook Protector Gasket, door from 96/12 714 0 716 0 716 1 716 2 721 0 4812 905 08153 4812 905 08151 4812 905 08133 4812 905 08132 4819 905 01145 Threaded cap Reg.dosage Gasket Collar Hub f.sprayer lower 191 1 191 3 191 4 191 5 191 6 4812 905 08197 4812 905 08004 4812 905 08179 4812 905 08181 4812 905 08376 Protector Corner piece Bracket right Bracket left Support plinth 721 1 722 0 722 2 722 3 722 4 4819 905 00067 4812 905 08145 4812 905 08212 4812 905 08207 4812 905 08213 Spray arm below Spray arm upper Connection Flap non-return Connection 191 7 191 8 241 0 241 1 241 3 4812 905 08163 4812 905 08543 4812 905 08195 4812 905 08159 4819 905 01224 Gasket Front trim Basket upper cpl. Guide Wheel,basket upper 722 5 723 0 723 1 726 1 726 2 4819 905 01223 4819 905 01218 4812 905 08131 4812 905 08183 4812 905 08185 Gasket Spray arm ceiling Nozzle Ceiling Hose Threaded ring 241 4 242 0 242 1 243 5 243 6 4819 905 01225 4819 905 01208 4819 905 00675 4819 905 00089 4819 905 01238 Bushing Basket lower Wheel,basket lower Basket cutlery Holder f.spoons 726 3 751 0 756 0 761 0 761 3 4812 905 08184 4812 905 08169 4812 905 08188 4812 905 08218 4812 905 08172 Gasket Water collector Floater Filter Support 261 0 261 1 261 2 261 3 263 0 4819 905 01214 4812 905 08146 4819 905 01226 4819 905 01217 4819 905 01215 Guide f.basket Basket Flap Tailpiece ahead Tailpiece guide Small plate support 763 0 781 0 781 3 781 4 783 1 4812 905 08173 4812 905 08135 4812 905 08157 4819 905 01144 4812 905 08187 Filter Hose,draining Gasket Rubber Motor Hose 301 0 301 1 332 0 332 3 351 0 4812 905 08873 4812 310 28261 4812 905 08532 4812 905 08533 4812 905 08529 Control panel ADG 758 print Plate KIT Button Rubber Switch on/off Indication unit 783 2 783 3 783 4 783 5 783 6 4812 905 08168 4812 905 08149 4812 905 08182 4812 905 08539 4812 905 08192 Hose Pump Hose Hose Hose heating element Hose 354 0 400 0 405 0 430 0 450 0 4812 905 08707 4812 905 08773 4812 905 08217 4812 905 08156 4812 905 08537 Protector Spray pump Support motor Pump,draining Heating element 783 7 783 8 791 0 791 1 794 0 4819 905 01197 4812 905 08196 4812 905 08186 4812 905 08167 4819 905 01143 Hose Drainhose Flange Gasket Gasket ceiling sprayer SERVICE Whirlpool Europe Customer Service Spare part list Model Service No. Version ADG 758 851115510811 851115510811 Pos. No. 12NC Code Description 794 7 900 2 904 0 904 1 991 0 4819 480 53059 4819 905 00494 4812 905 08147 4812 462 79738 4812 905 08414 Filter Holder Thermostat Stopper & 1201 Stopper Template 993 5 4819 905 00033 Funnel ADG758 8511 155 10811 16.11.2005 (Mod. 01) / Page 5 Doc. No: 4812 728 11715 16.11.2005 / Page 6 Doc. No: 4812 728 11715 Exploded view ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE SERVICE Exploded view Whirlpool Europe Customer Service ADG 758 8511 155 10811 16.11.2005 / Page 7 Doc. No: 4812 728 11715 16.11.2005 / Page 8 Doc. No: 4812 728 11715 Exploded view ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE SERVICE Exploded view Whirlpool Europe Customer Service ADG 758 8511 155 10811 16.11.2005 / Page 9 Doc. No: 4812 728 11715 16.11.2005 / Page 10 Doc. No: 4812 728 11715 Wiring diagram ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE SERVICE Whirlpool Europe Customer Service ADG 758 8511 155 10811 Line/ Neutral Terminal block F Interference filter I/O ON/ OFF FLMT Flow meter NTC Thermostat temp. sensor MPB1 Door microswitch 1 MPB2 Door microswitch 2 DDDB Detergent dispenser EVC Water inlet valve DP Drain pump AQS Aquastop PRLS Pressostat SP Spray pump motor EVR Water regeneration valve RA Heating element THS Safty thermostat FU Fusible MV Fan SB Sensor rinse aid SS Sensor salt DIV Diverter position MA Diverter motor TR Triac R Rele LD LED SC Timer Circuit diagram L/N 16.11.2005 (Mod. 01) / Page 11 Doc. No: 4812 728 11715 16.11.2005 / Page 12 Doc. No: 4812 728 11715 Text/Legend ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE SERVICE Text/Legend Whirlpool Europe Customer Service ADG 758 8511 155 10811 16.11.2005 / Page 13 Doc. No: 4812 728 11715 16.11.2005 / Page 14 Doc. No: 4812 728 11715 Text/Legend ADG 758 8511 155 10811 Whirlpool Europe Customer Service SERVICE
