Download AT&T Mobile Hotspot User Guide

Using a microSDHC Card With Your MiFi Device
Your MiFi device comes with a microSDHC card slot that allows you to bring files with you without
having to carry an additional flash drive. (The microSDHC card is not included with the MiFi device.)
Insert the microSDHC Card
➤➤
Insert the microSDHC card into the microSDHC slot.
NOTE – Be careful not to touch the contacts.
– Do not force the card into the slot. Check the orientation of the card if you have difficulties, and be
sure it slides easily into the slot.
– Your MIFi device supports microSDHC (High Capacity) and the original microSD cards up to 32GB.
(For the purposes of this user guide, microSDHC is used.)
Enable File Sharing on Your MiFi Device
Insert a microSDHC card.
File sharing is not enabled by default. If you establish file sharing on your MiFi device, others
connected to your MiFi device can access the files on your microSDHC card.
➊➊
Open your browser, go to http://att.mifi, and then click Login. See Log In to the MiFi Landing
Page (http://att.mifi) on page 14.
➋➋
Click Administration.
58