Download INSTALLATION MANUAL

Transcript
SOLO-KC
9.5.1
INSTALLATION MANUAL
SPO parameter
Parameter is used to define the starting point on the SIM card from where toward the parameters are
written.
NOTE
9.5.2
This parameter is only used when programming is done via SMS or directly over USB
connection. This parameter must be send first before other parameters.
LOT parameter
LOT parameter is used to define the time out control for voice calls. The start of voice connection
starts the LOT timer. If the voice connection is still ON when the LOT timer expires SOLO KC
disconnects ongoing voice connection.
9.5.3
#0 parameter
Parameter is used to define head of the SMS message. It is used by the user to uniquely define the
name of the SOLO KC device. This name will be put in front of every SMS the user will receive.
NOTE
9.5.4
The text for a name if written together with the parameter name.
Example: #0DEMO
Table of parameters
Name
UDC
RAN
HTN
TST
TSTT
MNF
MIC
SPK
ARST
ADF
LNG
BUZ
LOT
#0
Comment
Tel. number of SOL KC device
Auto answer ring number
Hidden telephone number
SMS test time out
Periodic test SMS start time
Manual GSM provider selection
Microphone volume control
Speaker volume control
Time out control for automatic system restart
Auto dial functionality ( Call TN1 )
Language selection
Buzzer control
Voice time out control
Unique name for SMS reporting
Table 10: Set-up parameters.
Page 23