Download INSTALLATION MANUAL

SOLO-KC
INSTALLATION MANUAL
10.7 RECEIVE ACCESS TELEPHONE NUMBERS (PSL)
By sending this command to SOLO KC you receive SMS message with programmed SL level:
;PSL;
10.8 RECEIVE OUTPUT PARAMETERS (POS)
By sending this command to SOLO KC you receive SMS message with all currently programmed
Outputs parameters (OS1 ):
;POS;
10.9 RECEIVE ALL PROGRAMMED SMS MESSAGES (P#)
By sending this command to SOLO KC you receive SMS message with all currently programmed
alarm SMS messages (#0):
;P#;
10.10 RECEIVE SET UP PARAMETERS VALUE (PPA)
By sending this command to SOLO KC you receive SMS message with all currently programmed
Setup parameters (TST, MNF…):
;PPA;
10.11 RECEIVE CREDIT PARS PARAMETERS (PCREF)
By sending this command to SOLO KC you receive SMS message with all currently programmed
credit parse parameters (CREF, CVODA…):
;PCREF;
10.12 RECEIVE CREDIT PARS PARAMETERS (PCN)
By sending this command to SOLO KC you receive SMS message with all currently programmed
credit check number (CC1, CC2, CC3):
;PCN;
10.13 RECEIVE ALL CLIP PARAMETERS (PCLP)
By sending this command to SOLO KC you receive SMS message with all currently programmed
CLIP functionality related parameters (CLPEN, CLPOU, CLPx):
;PCLP;
Page 34