Download DVR User Manual

DVR User Manual
Fig 4-38 P.T.Z Configuration-Advanced
Fig 4-39 Advanced-Preset
Step 3: In the preset setting tab, while clicking Setting button, a dialog will pop-up as Fig 4-40:

User can control the dome by rotating up, down, left, right and
adjust the rotating speed zoom, focus and iris of the dome;

Select the serial number of the preset point. Click
button
to enable the PTZ wiper and click
light.
button to enable the PTZ
Fig 4-40 Preset Setting
Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two buttons are
just available when selecting PELCOP or PELCOD.

Click Save button to save the settings, click
icon to hide the tool bar, right click to view the toolbar again; click
icon to exit the current interface.

In the preset interface, click OK button to save the setting; click Exit button to exit the current interface.
Step4: In the Advanced tab, while clicking cruise “Setting” button, a dialog box will pop-up as Fig 4-41:
42