Download PathwaysTM 4 Software User's Guide

To adjust template points with a magnifier present, perform the following steps.
1
Deselect the Adjust Global option, and select Use Magnifier.
2
Move the pointer over each alignment point, and a magnifier window appears
(an alignment hint picture also appears on the left panel).
3
Click anywhere in the magnifier window, and the alignment point snaps to this
location.
4
The magnification can be increased or decreased using the up or down arrow keys
while the magnifier is present.
Perform the following steps to adjust alignment points without magnification:.
Deselect the Use Magnifier check box.
Click and drag the alignment point to move it.
With ResGenTM GeneFilters microarrays, the template alignment points are located over 16 of
the control spots for each microarray. In Field 1 of the GeneFilters microarray, the template
alignment points are the upper right control spot in each grid. In Field 2 of the GeneFilters
microarray, the template alignment points are the lower right control spot in each grid (refer to
Appendix I). When the control spots are not visible (e. g., in cross-species hybridization), then
the alignment points must be in the approximate position where the control spots normally
reside; verify the accuracy of the alignment by viewing the overall template positioning.
70
RGMA10011 rev B