Download Raymarine Satellite TV Systems User's Guide

32
Raymarine Satellite TV Systems
Setting the satellite pair - DirecTV
SAT A* : DTV119
SAT A : DTV101
SELECT
EXIT
D78642_1
NEXT
SAT B: DTV101
SELECT
EXIT
D8643_1
NEXT
1. Follow steps 1 thru 3 for entering set
up mode- see “Set up mode” on
page 27. Press YES to set satellite
pair.
2. Set satellite A.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
3. Set satellite B.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
SAT B* : DTV110
NEXT
SELECT
EXIT
D8645_1
NEXT
EXIT
SAVE?
YES
NO
D7977_1
YES
D7974_1
PREV
SELECT
D8644_1
NEXT
SET SAT PAIR?
4. Set satellite A when DiSEqC is active
from IRD.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
5. Set satellite B when DiSEqC is active
from IRD.
Press NEXT to show alternative
satellite name.
Press SELECT to set chosen satellite to
SAT A.
Press EXIT to return to main set up
menu.
6. Press YES to save selections.
Press NO to cancel and return to main
setup menu.
Note: DiSEqC is not used with Dish Network or ExpressVu satellites.This
menu is displayed when the DiSEqC method - see page 34 is set to
“Use to change sat”.