Download User's Manual - Security Point
Transcript
Network Camera Server User’s Manual System Configuration System configuration is to set up basic functions which help you properly run and manage the system. It is highly recommended to set up the configuration before any other configurations. Following functions are provided in the System configuration mode. - System name and Info - System Administration account set up - System access level setting - Serial port configuration (PTZ or external device connection) - TX Module configuration 1 System Information System information is very important one Following menu will be provided Server Name Serial Number Model Version User definable and Identifier of the system when the system is accessed by third party program such as NDVR software. Product serial number. This information must be submitted for RMA or Warranty claim This information also needs to be submitted for technical support request System firmware version. This information also needs to be submitted for technical support request 2 Date & Time Date & time is very important factor to trigger any service at the right time such as FTP, e-Mail, Alarm notification etc. If Date & time is not correctly set up in the system, any service which will be triggered by schedule condition will be not done correctly. Also Server Date & time info will be displayed on the image. If you need to display correct time, please set up more accurate time information. 2.1 Date & Time in the server clock Date & time can be set up in the real time clock built in the server. Simple set up Date & Time info in the Date & Time configuration field. 1) Go to Date & Time setup menu in the System configuration section of Admin mode 42 Seyeon Tech Co., Ltd