Download User's Manual - Security Point

Network Camera Server
User’s Manual
from the option provided.
Always :
To active any selected option regardless condition. If you select this condition Schedule
and Event condition window become inactive.
Schedule Only :
To active any selected option by scheduling. If you select this criteria, Event condition
setup window become inactive
Event Only :
To activate any selected option by Event only. Sensor status change is recognized as
Event.
Schedule and Event :
To active any selected action when Event is triggered for the specified time period only. If
Event is incurred out of Scheduled period, no action will be done.
2.2 Criteria Setup
Once condition is selected, you need to set up event criteria following which any selected
service will be executed.
Criteria consist of Schedule and Event which included Sensor input trigger, Boot finish
and Serial input data trigger.
2.2.1 Schedule
You can select the day from the week. If you uncheck Sun and Sat, Sun and Sat will be
excluded from the condition. If you enable Time only and disable Day of week and Date,
any action taken place during specific time of the day, will be effective regardless day of
week and Date of the year.
Above setting tells you that any action (e-mail, FTP or other services) will be done if any
event is happened from 9AM to 10PM from Monday to Friday from March to September of
the year.
78
Seyeon Tech Co., Ltd