1
Download USER'S MANUAL - Frank's Hospital Workshop
Transcript
EI1121A – Echo PC User manual - Rel. 7.3.1.17. 1.1 Factor Range: 0.000 – 99999. This parameter will appear only when the number of standard is minor or equal to 1. For the mono standard or with no standard methods, the factor value is multiply for the optical density to have a result. The user should insert the factor, in case of methods without standard. 7.3.1.18. Description of the Curve This parameter appears only when the number of standards is greater than 1. This multiple parameter permits the visualization of the values curve: the upper line is the Y coordinate (O.D.), the inferior line is the X coordinate (Val. Std.). The curve has as many points as many number of standards has been defined in the parameter 11. The result is calculated with the Cubic spline interpolation. Edif Instruments s.r.l. – Via Ardeatina, 132 – 00179 Roma – ITALY Tel.+39/065127161 – Fax +39/065127550 email [email protected]
