Download Rayica User Guide

58
Rayica User Guide
In[74]:= SearchData[PlanoConvexLens, ComponentBoundary->50, FocalLength->75]
Out[74]=
88CatalogNumber Ø LQF066, CenterThickness Ø 13.8, CompanyName Ø MellesGriot,
ComponentBoundary Ø 50., ComponentLabel Ø OpticalQualityPlanoConvex,
ComponentMedium Ø FusedSilica, Date Ø 81999, 4, 18<, DesignRefractiveIndex Ø 1.46008,
DesignWaveLength Ø 0.5461, FileName Ø Melles.m, FocalLength Ø 75.0089,
OpticaFunction Ø PlanoConvexLens, RadiusOfCurvature Ø 834.51, ¶<,
SurfaceBoundary Ø 850., 50.<, SurfaceSeparation Ø 13.8<,
8CatalogNumber Ø LQP005, CenterThickness Ø 13.8, CompanyName Ø MellesGriot,
ComponentBoundary Ø 50., ComponentLabel Ø UVGradePlanoConvex,
ComponentMedium Ø FusedSilica, Date Ø 81999, 4, 18<, DesignRefractiveIndex Ø 1.46008,
DesignWaveLength Ø 0.5461, FileName Ø Melles.m, FocalLength Ø 75.0089,
OpticaFunction Ø PlanoConvexLens, RadiusOfCurvature Ø 834.51, ¶<,
SurfaceBoundary Ø 850., 50.<, SurfaceSeparation Ø 13.8<,
8CatalogNumber Ø PCX45246, CenterThickness Ø 11., CompanyName Ø EdmundScientific,
ComponentBoundary Ø 50., ComponentLabel Ø PlanoConvex, ComponentMedium Ø BK7,
Date Ø 81999, 4, 18<, DesignRefractiveIndex Ø 1.51678, DesignWaveLength Ø 0.588,
FileName Ø Edmund.m, FocalLength Ø 75.0027, OpticaFunction Ø PlanoConvexLens,
RadiusOfCurvature Ø 838.76, ¶<, SurfaceBoundary Ø 850., 50.<, SurfaceSeparation Ø 11.<,
8BackFocalLength Ø 66.3, CatalogFocalLength Ø 75., CatalogNumber Ø FPX11730ê000,
CenterThickness Ø 12.7, CompanyName Ø JML, ComponentBoundary Ø 50.,
ComponentLabel Ø PlanoConvexLens, ComponentMedium Ø Quartz, Date Ø 81999, 4, 18<,
DesignWaveLength Ø 587.6, EdgeThickness Ø 1.9, FileName Ø JML.m, FNumber Ø 1.5,
FocalLength Ø 75., OpticaFunction Ø PlanoConvexLens, RadiusOfCurvature Ø 834.38, ¶<,
SurfaceBoundary Ø 850., 50.<, SurfaceSeparation Ø 812.7<, V1H1 Ø 0, V2H2 Ø -8.7<,
8BackFocalLength Ø 67.5, CatalogFocalLength Ø 75, CatalogNumber Ø CPX10195ê100,
CenterThickness Ø 11.4, CompanyName Ø JML, ComponentBoundary Ø 50,
ComponentLabel Ø PlanoConvexLens, ComponentMedium Ø BK7, Date Ø 81999, 4, 18<,
DesignWaveLength Ø 632.8, EdgeThickness Ø 2.2, FileName Ø JML.m, FNumber Ø 1.5,
FocalLength Ø 75, OpticaFunction Ø PlanoConvexLens, RadiusOfCurvature Ø 838.63, ¶<,
SurfaceBoundary Ø 850, 50<, SurfaceSeparation Ø 811.4<, V1H1 Ø 0, V2H2 Ø -7.5<,
8CatalogNumber Ø 43-0462, CenterThickness Ø 11.6, CompanyName Ø Coherent-Ealing,
ComponentBoundary Ø 50., ComponentLabel Ø 43-0462 PLANO-CONVEX PlanoConvexLens,
ComponentMedium Ø BK7, Date Ø 81999, 4, 18<, DesignRefractiveIndex Ø 1.5168,
DesignWaveLength Ø 0.5876, EntrancePupilDiameter Ø 845.<, FileName Ø CoherentEaling.m,
FocalLength Ø 75.0003, GlassCatalogs Ø 8SCHOTT, MISC, INFRARED<,
OpticaFunction Ø PlanoConvexLens, RadiusOfCurvature Ø 838.76, ¶<,
StopPosition Ø 1, SurfaceBoundary Ø 850., 50.<, SurfaceCurvature Ø 80.0257998, 0.<,
SurfaceLabel Ø 8SphericalShape, SphericalShape<, SurfaceSeparation Ø 11.6<<
With so many reported entries, the SearchData results can get to be confusing. In order to clarify the important information,
you can use ReadData, instead of SearchData, in order to view isolated parameters from the data base search. We will now
use ReadData with the same parameter search as before:
In[75]:= ReadData[{ComponentBoundary, FocalLength, CatalogNumber}, PlanoConvexLens,
ComponentBoundary->50, FocalLength->75]
Out[75]//DisplayForm=
ComponentBoundary
50.
50.
50.
50.
50
50.
FocalLength
75.0089
75.0089
75.0027
75.
75
75.0003
CatalogNumber
LQF066
LQP005
PCX45246
FPX11730 ê 000
CPX10195 ê 100
43 - 0462
©1994-2005 Optica Software. All rights reserved.