1
Download R&S FSVR Realtime Spectrum Analyzer User Manual
Transcript
R&S®FSVR Remote Operation of the R&S FSVR Remote Control – Commands Suffix: <n> . 1...4 window <ChannelType> LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot Channel type for which the command is performed. Query parameters: <MeasType> ALL | ADEV | RDEV | SINad | THD | AFRequency | XTALk ALL All available measurement values ADEV The absolute deviation RDEV The relative deviation SINad The signal-to-noise-and-distortion value THD Total harmonic distortion AFRequency Audio frequency XTALk Crosstalk between left and right channels in dB: -20|log(Left [kHz] / Right[kHz])| dB *RST: Return values: <Result> ALL Measurement value according to the specified measurement type. Note: if the specified result value is not available, a "Query Error" is returned. If all result values are queried (query parameter "ALL"), and one of them is not available, 9.91E+37 is inserted for the missing value. Example: CALC1:MARK:FUNC:SFM:LEFT? THD Queries the total harmonic distortion for the left stereo channel. Usage: Query only Mode: SFM CALCulate:MASK Subsystem The commands of the CALCulate:MASK subsystem configure the frequency mask trigger. Programming example TRIG:SOUR MASK //Selects the frequency mask as a trigger source. MMEM:MDIR 'C:\R_S\instr\freqmask\MyMasks' CALC:MASK:CDIR 'MyMasks' User Manual 1311.0687.32 ─ 04 672
