Download WISER: User Manual
Transcript
3.5 PROCEDURE FOR SWITCHING OFF THE SYSTEM To switch off the system you will only need to take the following actions: Brind the system to the “Sstand-by” state pushing the “Stand By/Ready/Operate” button. Press the main switch (see fig.2.4 f) 3.5.1 Emergency stop Whenever there may be an emergency situation you can switch off the machine by simply pressing the emergency button (see fig.2.1 A). Any pressure applied to this button will instantaneously block the system and the eventual emission of radiation in progress. After pressing the emergency button do not forget to press the main switch. In case of emergency stop the laser get instantly blocked in all operations. When danger ceased, it is necessary to press the emergency button again in order to start and activate the machine again. Push “stop” button to block instantaneously the system and the eventual emission of radiation in progress. Press the main switch. Model LA3D0001.1 | Manual Code LI3D0001.2 Pag. 41 | Date 25-09-2009