Download SerialLite III Streaming MegaCore Function User Guide
Transcript
3-12 UG-01126 2015.05.04 Arria 10 Simulation Testbench Arria 10 Simulation Testbench If your design targets Arria 10 devices, the generated example testbench is dynamic and has the same configuration as the IP (except for the metaframe length). When you choose the sink or duplex direction, the parameter editor generates an external transceiver ATX PLL for use in the Arria 10 testbench. Therefore, Altera recommends that you generate the Arria 10 simulation testbench for designs using the sink or duplex direction. Note: The Arria 10 example testbench includes the external transceiver PLL; the IP core does not include the transceiver PLL for these devices. Figure 3-5: SerialLite III Streaming Example Testbench (Duplex) for Arria 10 Devices Test Environment Device Under Test (Duplex Mode) Traffic Generator Source Absorber Source Application Loopback Source Clock Generator Testbench Traffic Checker Sink Application Transceiver TX PLL Source Adaptation Sink Adaptation Sink Alignment Native PHY IP Duplex Interlaken Mode Skew Insertion Sink Clock Generator Altera Corporation Getting Started Send Feedback