Download User Guide - Antech Sales, Inc

100/180 mm paperless GRAPHIC RECORDER: USER GUIDE
3.3.1 Access to Configuration
1
2
3
4
5
As shown in figure 3.3.1a, once the recorder has initialised, touch the current access level key
Touch the ‘Logged out’ field and then touch ‘Engineer’ from the resulting picklist.
Touch the blank Password area to call the keyboard display (see figure 3.3.1b).
Touch <Numeric><1><0><0><OK> to enter the password ‘100’. The screen reverts to the ‘Home’
page.
Operation of the Root key followed by a touch on the Operator key calls the top level page allowing
access to the Archive, Save/Restore, Config, Security, Network and System areas described in section 4 below.
1
Touch Current
access level key
Group name
Logged out
Channel 1
0.2000
0.0000
11:52:59
05/04/05
0.4000
0.6000
0.8000
Login
Select the required access level and enter the password if
required.
User Logged out
Logged out
Operator
Engineer
3
0.0237V
1.0000
11:52:04
05/04/05
2
Touch 'logged out'
area...
...then touch access
level required.
Service
11:49:24
05/04/05
Touch the password window when it appears, and enter the password.
The Engineer level password is '100' when the unit is despatched from
the factory. Passwords can be edited in 'Security' as described in section 4.4.1.
The screen reverts to the home page, with the new access level displayed in the 'Current access level' key
11:46:44
05/04/05
Close
Figure 3.3.1a Access to configuration
Notes:
1. For units which have the Auditor 21CFR11 Option enabled, the default Operator password is
‘100’. Otherwise no password is required for default Operator level access. In either case the
Operator access level password can be edited in ‘Security’ configuration. (Section 4.4.1.)
2. The login screen, above, can also be called by operating the Root menu, then ‘Operator’ then
‘Security’, then ‘Login’. In such a case, the screen reverts to the ‘Operator’ page rather than
returning to the home page once login has been achieved.
3. Figure 3.3.1a shows ‘Login by user list’ which is the default method. If either Auditor option
and/or the Security management option is enabled, an alternative procedure is possible where
each user has to enter a name and associated password - i.e. there is no list of users/access
levels to choose from. See section 4.4.2 (Management) for details.
4. For Active Directory users, a password expiry warning message (below) pops up on log-in,
stating how many days remain before the password expires (configured at the Active Directory
server).
Warning
Fred password expires in 2 days
Ok
User Guide
Page 32
HA028910
Issue 8 Oct 10